ALGE-Timing TDC8001, Manual

Page: 24 / 112

Manual
TdC 8001
-24-
3.2.3 Function Keypad (9)
Key for confirmation of YES/NO question.
Key for denial of YES/NO question.
When pressing <PRINT> the printer switches to buffer mode, i. e. all printer information is
saved. Pressing <PRINT> again, all saved data is printed. This function is used during paper
exchange. Pressing <ALT> and <PRINT> at the same time, turns the printer off. All infor-
mation for the printer is lost. Press <PRINT> or <ALT> and <PRINT> again turns the printer
on again. Press <MENU> and <PRINT> at the same time to print all settings of the main
menu.
System test (see 2.10)
Setting start number stepping: * and + automatically up, * and * manual, * and – automatically
down
Printing the ranking
Cursor key up
Cursor key down
For activating second function always first press <ALT>, functions with <CLEAR>,
<BLOCK>, <MENU> and <PRINT>.
Always press this together with another key; works with <ALT>, <INPUT>, <PRINT>, or
<BLOCK>. In order to switch to the main menu press <ALT> and <MENU>
Function key 1: selecting if in the info display (7) text is shown right-aligned in the first line
Function key 2: selecting if in the info display (7) text is shown right-aligned in second line
Function key 3: selecting if in the info display (7) text is shown right-aligned in the third line
Function key 4: selecting if in the info display (7) text is shown right-aligned in the fourth line
Buffer for mass arrival at the finish or at an intermediate time (see chapter 4.4)