Manual
TdC 8001
-65-
−
Finish impulse for number 1 effected
−
Finish impulse for number 2 effected
−
Info display (7) must show start number of blue (left) and red (right) course as well as the ap-
propriate run time
−
Info display (7) shows heat difference time next to winner time
−
After end of display time, net total time as well as total difference time is shown for both com-
petitors
−
Start numbers for next pair of competitors can be entered identically
Further heats:
Every time a competitor competes with a new opponent, there is a new roand. I. e. in
the first roand for example start number 1 competes 8 as well as start number 5 com-
petes 4. After the second heat the competitor with the best total time reaches the next
round.
Before a new roand is started, the user must communicate this to the TdC 8001 by
opening menu 24. Then “change heat” and “next” (<F2>), confirm with <ENTER>.
Functions of keys
BLUE (left)
Keypad (9) or (14)
RED (right)
Keypad (15) or (14)
Clear finish time
CLEAR
CLEAR
Restore finish time
ALT + CLEAR
ALT + CLEAR
invalid finish times
BLOCK
BLOCK
Suppress finish time
ALT + BLOCK
ALT + BLOCK
No function
INPUT
INPUT
No function
MENU + INPUT
MENU + INPUT
No function
F1
F1
No function
F2
F2
No function
F3
F3
Switch between finish and start time
F4
F4
No function
CLASS.
CLASS.
Penalty time:
The penalty time is applied as finish difference time when a competitor drops out of the race. In case no
penalty time is used, 0.000 has to be entered as penalty time.
When a competitor reaches the finish, the finish difference time starts. When the second competitor
does not reach the finish before the end of penalty time, the penalty time is shown on display (5) and
scoreboard. The printer marks the penalty time with “P”. The penalty time is entered in the main menu.
Clear finish times:
<CLEAR> applies to each corresponding course that is assigned to the keypad:
<CLEAR> of keypad (12) - blue (left) course
<CLEAR> of keypad (8) - red (right) course
<CLEAR> clears the last impulse of the corresponding course i. e. when <CLEAR> is pressed after the
start the time is reset to zero.
<CLEAR> is pressed when the competitor has finished. The running time appears once more. Pressing
<CLEAR> again clears the start time.
With shortcut <ALT> and <CLEAR> the last deleted time can be restored.
In case a penalty time is set (menu 28) the time with the calculated penalty time is automatically shown
after the finish time is cleared (if the other course already has a finish time).
Summary of Contents for TDC8001
