ALGE-Timing TDC8001, Manual

Page: 102 / 112

Manual
TdC 8001
-102-
8.1.5 RS232 / RS485 (d)
1 RS232, data TXD (transmit)
2 common ground
3 RS232, data RXD (receive)
4 RS232, control line CTS
5 RS232, control line RTS
6 RS485, line a
7 output external supply
8 RS485, line b
8.1.6 Display Board (i)
TdC 8001 sold before 2008:
Display board interface with data output channel 1 or 2 (yellow or white jack) and ground (black
or blue jack). The channel can be set in the menu.
TdC 8001 sold from 2008:
Display board interface with data output channel 1 (yellow jack) and ground (black jack).
8.1.7 Banana Jacks Channel 0 to 9 (h)
All channels can be connected via banana jacks. Four ground
connections (black) are available for the nine channels.
8.1.8 Multichannel (a)
1 channel 9
2 channel 0 (start)
3 channel 2
4 channel 3
5 channel 7
6 output data as channel 2
from „display board“ (e)
7 RS485 B
8 RS485 A
9 clock A
10 clock B
11 empty
12 joint ground
13 5 VDC stabilized
14 channel 1
15 channel 5
16 channel 8
17 channel 6
18 channel 4
19 empty
20 empty
21 empty
22 empty
23 output external supply
(5.3 – 14.3 VDC)
24 joint ground
25 external supply (6 – 15 VDC)
8.2 RS232 Interface (a, d)
output format
1 start bit, 8 data bit, no parity bit, 1 stop bit
transfer rate
: 9,600 Bd preferred setting (adjustable: 2400, 4800, 19200)
transfer protocol
ASCII
xNNNNxCCxxHH:MM:SS.zhtqxGR(CR) times from c0 to c9
xNNNNxCCMxHH:MM:SS.zhtqxGR(CR)
manually stopped time (with <START> or <STOP>)
xNNNNxRTxxHH:MM:SS.zhtxxGR(CR) run time
xNNNNxTTxxHH:MM:SS.zhtxxGR(CR)
total time
xNNNNxSQxxHH:MM:SS.zhtxxGR(CR) sequential time (lap time)
xNNNNiCCxxHH:MM:SS.zhtxxGR(CR)
dual timer, times from c0 to c9
xNNNNiRTxxHH:MM:SS.zhtxxGR(CR) dual timer, run time
xNNNNiCCxxHH:MM:SS.zhtqx##(CR) parallel slalom, intermediate time or finish time
xNNNNiRTxxHH:MM:SS.zhtqx##(CR)
parallel slalom, run time
xNNNNiDTRxHH:MM:SS.zhtxx##(CR) parallel slalom, run difference time