Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 76 / 360

Configure

Left running head:
Chapter name (automatic)

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Alcatel-Lucent

ONFIGURE

OOPBACK

NTERFACE

Follow the procedure below to configure Loopback interface.

Step 1:

On the

Interfaces

page, click

Configure

icon for the Loopback interface

to be configured.

Configuring Loopback

page is displayed in the Center Panel.

Figure 34: Interfaces - Configure Loopback Interface

Step 2:

The primary address configured for the interface is displayed in the

Basic

box.

IP address and the description configured for the interface is displayed in their
respective fields.

VRF Forwarding displays the VRF configured. To remove the VRF, click

Remove

Make the changes and click

Apply

or click

Reset

to retain the original details.

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands