Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 340 / 360

Monitor

Left running head:
Chapter name (automatic)

330

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Alcatel-Lucent

The table below provides description for filters page.

Table 45: Filters Field Description

Field

Description

ILTERS

Filter List

Lists the filters configured in the system

Show Policy Statistics

Displays global statistics for the selected
Filter policy

Filter Params

Default Action

Default action of the filter: PERMIT/
DENY.

Stateless

Indicates if the filter is stateless or not

Time Range

Time range associated with the filter.

Default Hits

Number of default hits associated with
the filter.

Configured Actions

Priority

Priority set for the filter.

Match List

Match list associated with the filter.

Rule Action

Action for the rule: DENY/PERMIT

Packet Hits

Number of packets hit for that particular
action.

This field is displayed Show Policy
Statistics button is clicked.

Interface Bindings

Interface

The interface to which the filter is applied

Direction

The direction of the traffic to which the
filter is applied: In/Out

Action

Enable/Disable statistics for a selected
interface from the

Configuration

page.

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands