Alcatel-Lucent OmniAccess 5740 User Manual Download | Manualshive

Page: 51 / 360

background image

Configure

Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)

41

Alcatel-Lucent

Beta

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

•

Configure LCP parameters in

LCP Configuring

table. This helps in deciding

whether the system initiates the LCP negotiation or just responds.

i. Enter the maximum echo value in

Max Echo

field.

This denotes the maximum number of unanswered LCP echo requests
sent before LCP decides that the peer is down. The value “0” implies that
the link will not be brought down on the basis of unanswered echo
requests. Default echo interval is 5 seconds.

ii. Enter the echo interval in

Echo Interval

field.

This denotes the interval between the LCP echo requests sent. “0” implies
that no echo requests are sent. The default value is 10 seconds.

•

Configure the PPP Timer configuration in

Timer Configuring

table.

i. Enter the restart timer in

Restart Timer

field to set the time period for

retransmission of LCP and NCP packets. The default value is 3 seconds.

ii. Enter the maximum number of pings before terminating to send packets in the

Max Terminate

field.

This terminates request packets (Number of LCP or NCP) without
receiving a Terminate Ack before assuming that the peer is unable to
respond. The default value is 2 seconds.

iii. Enter the max configure value in

Max Configure

field.

Configure Request packets (Number of LCP or NCP) without receiving a
valid Configure Ack/NaK/Reject before assuming that the peer is unable
to respond. The default value is 10 seconds.

iv. Enter the max failure value in

Max Failure

field.

Configure NaK packets (Number of LCP or NCP) without receiving a
Configure Ack before assuming that configuration is not converging. The
default value is 5 seconds.

•

Click

OK

to save LCP and PPP Timers configuration or click

Cancel

to cancel the

operation.

8.

After configuring the parameters, click

Apply

to save the PPP configuration or

click

Cancel

to cancel the operation.

«
...
49
50
51
52
53
...
»

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Reviews:

No comments

Related manuals for OmniAccess 5740

Brand: TANDBERG Pages: 58

ECL Comfort 110

Brand: Danfoss Pages: 8

Brand: Yeastar Technology Pages: 66

Brand: Hoymiles Pages: 2

SymbiLink SLN-4

Brand: zapco Pages: 15

926 Gateway Light

Brand: Midas Pages: 10

LANLINK ZDIGLANLINK

Brand: DIGITAL YACHT Pages: 7

Brand: Aaeon Pages: 26

Brand: Huawei Pages: 28

Catalyst 8200 Series

Brand: Cisco Pages: 8

Brand: ABB Pages: 22

Brand: ProSoft Technology Pages: 104

Brand: TCAM Pages: 25

Intelligent Gateway 1800

Brand: 2Wire Pages: 148

Brand: Ness Pages: 7

Brand: Technicolor Pages: 39

Brand: Vantron Pages: 98

Brand: FarSite Communications Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands