Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 348 / 360

Monitor

Left running head:
Chapter name (automatic)

338

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Alcatel-Lucent

The table below provides description for Firewall Policy page.

Table 48: Firewall Policy Field Description

IEW

IREWALL

OLICY

TATISTICS

FOR

ULE

In the

Firewall Policy

page, click

Firewall Policy Statistics for Rule

icon in the

Action

column against the attack whose statistics are to be viewed.

This displays the firewall statistics for the rule in a pop up window as shown
below:

Figure 225: Firewall and Security - Firewall Policy - Show Policy Statistics

Field

Description

IREWALL

OLICY

Firewall Policy Name

Lists the firewall policies configured in
the system.

Show Policy Statistics

Displays the firewall policy statistics.

Rules Configuration

Rule #

Rule number.

Match List

Match list associated with the firewall
policy.

DOS Attack

DOS attack policy associated with the
firewall policy.

Action

Action defined for the firewall policy.

Time Range

Time range associated with the firewall
policy.

Action

Provides option to view the firewall
statistics for the rule.

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands