Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 184 / 360

Configure

Left running head:
Chapter name (automatic)

174

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Alcatel-Lucent

The table below provides field description for DOS Attack page.

Table 17: DOS Attack Field Description

REATING

DOS A

TTACK

Follow the procedure below to create DOS Attacks.

Step 1:

Click

New DOS Attack

DOS Attack

page to create new DOS Attack.

The

New Attack

page is displayed.

Field

Description

DOS A

TTACK

Configured DOS Attack

Attack Name

DOS attack configured on your system.

Firewall Policy Reference

Firewall policy to which the DOS attack
is attached.

Action

Provides option to view the configured
DOS attacks, edit, and delete the
configured DOS attacks.

New DOS Attack

Allows to create a new DOS attack.

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands