Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 42 / 360

Configure

Left running head:
Chapter name (automatic)

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Alcatel-Lucent

Step 4:

Configure channel groups on the controller. This creates a channel-group

that will form a Channelized Serial Interface.

Click

Configure Channel Group

configure channel group.

Channel Group Configuring

pop up window is

displayed.

Figure 15: Interfaces - T1 Controller - Channel Group Configuring

•

Enter the channel number in the

Channel Number

field.

•

Enter the range of the time slots that can be associated with the T1 controller in
the

Time Slot

field. (Time slot can also be provided in ‘a-b’ format. E.g, 1-2)

•

Select the speed from the

Speed

drop down list. Default speed is 64 kbps.

•

Click

. The channel group thus configured is displayed under the

Channel

Group Configuration

table. Repeat this procedure to configure more channel

groups.

Step 5:

Click

Apply

to save the T1 Controller configuration or click

Close

return to the Interfaces page.

Step 6: The channel-group thus configured forms the channelized serial
interface, and is displayed in the Interfaces page.

Note:

You can configure encapsulation on a channelized serial interface. See

“Configure

Channelized Serial Interface”

for more details on this.

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands