Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 232 / 360

Configure

Left running head:
Chapter name (automatic)

222

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Alcatel-Lucent

Figure 139: Intrusion Prevention: Status

The table below provides field description for Status page.

Table 25: Status Field Description

Field

Description

TATUS

Intrusion Sensor

IPS Status

Signature Database Version

The version of the signature database,
which will have the vendor version
information as well as the local version
information.

Signature Database TimeStamp

This displays the timestamp of the
signature file.

Signature Update Report

This displays the last time the security
appliance on device checked for the
signature updates on remote signature
server.

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands