Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 154 / 360

Configure

Left running head:
Chapter name (automatic)

144

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Alcatel-Lucent

Figure 78: Firewall: Firewall Wizard - DMZ Settings

DMZ Settings for a firewall policy is optional.

In the wizard, by default, DMZ is enabled.

Unselect the

Enable DMZ

check

box, and click

Next

to continue firewall policy configuration without configuring

DMZ settings.

To configure DMZ settings, follow the procedure given below.

Select the DMZ interface from the

Select

DMZ interface

drop-down list. If a policy

is already attached to the selected interface, the system prompts you a message.

Add the DMZ service/s to be accessed through the internet. Click

Add

Add DMZ

Services

pop up window is displayed:

You have to add at least one DMZ service.

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands