Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 282 / 360

Configure

Left running head:
Chapter name (automatic)

272

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Alcatel-Lucent

Step 4:

The policy name for which the tunnel interface is being attached is

displayed against the

Policy Name

field.

Step 5:

Under Tunnel Attachment box, enter the following:

•

Select the tunnel interface from the

Tunnel Name

drop-down list.

Note:

The selected tunnel interface should already have a policy map attached to it. To
associate a policy map to an interface, see

“Attaching Policy Map to an Interface”

. If

the selected tunnel does not have a policy already associated with it, an error
message is displayed.

•

Enter the bandwidth for the tunnel interface in percentage in the

Bandwidth

Percentage

field. This should be in the range 1-100.

•

Enter the absolute bandwidth (bps) value in the

Bandwidth Absolute

field. This

should be in the range 101-700000000.

Step 6:

Click

Apply

to configure QoS over tunnel interface or click

Cancel

cancel the operation.

Step 7:

This automatically creates a tunnel class in the root (parent) policy. And,

the policy applied over the tunnel interface will become the child policy of the root
policy.

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands