Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 236 / 360

Configure

Left running head:
Chapter name (automatic)

226

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Alcatel-Lucent

LOBAL

ETTINGS

This page allows you to configure the IPS rules globally.

IEW

LOBAL

ETTINGS

Step 1:

From the USGM menu bar, click

Configure

. All submenu/links under

Configure are displayed in the left navigation panel.

Step 2:

Click

Intrusion Prevention

sub-menu.

The

Intrusion Prevention

menu has six tabs:

Status

Global Settings

Signature Policies

Sensors

Alerts and Reports

, and

View Rule File

Select the

Global Settings

tab. Global Settings page is displayed in the center

panel.

Figure 142: Intrusion Prevention: Global Settings

The table below provides field description for Global Settings page.

Table 26: Global Settings Field Description

Field

Description

LOBAL

ETTINGS

Intrusion Sensor

Allows to select the intrusion sensor
type.

Group Type

Allows to select the group type: Class
Type/Category/Priority

Class-type

Table is displayed based on IPS classes.

Rule

Indicates if the rule is used for
DETECTION or PREVENTION or
PREVENTION-RESET.

Status

Displays if a specific rule is enabled or
disabled.

Action

Provides an option to edit the IPS rules.

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands