Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 355 / 360

Monitor

Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)

345

Alcatel-Lucent

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

ULES

This page displays information about the intrusions detected as per the various
rules configured for IPS.

IEWING

REPROCESSOR

TATISTICS

Step 1:

Launch the Web GUI tool.

Step 2:

From the USGM menu bar, click

Monitor

. All submenu/links under

Monitor are displayed in the left navigation panel.

Step 3:

Click

IPS Statistics

sub-menu.

The IPS Statistics has three tabs:

Summary

Preprocessor

, and

Rules

. Select

Rules

tab.

Rules

page is displayed in the center panel with information about the

intrusions that were detected as per the snort rules.

Figure 229: Monitor: IPS Statistics - Rules

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands