manualshive.com logo in svg

Alcatel-Lucent OmniAccess 5740, User Manual

The Alcatel-Lucent OmniAccess 5740 offers an exceptional user experience with its cutting-edge features. Unlock the device's full potential with the comprehensive user manual, available for free download at manualshive.com. Get step-by-step instructions and unleash the power of the OmniAccess 5740 with this essential manual.

Share
Download
background image

Configure

Except on the first page, right running head:  
Heading1 or Heading1NewPage text (automatic)

45

Alcatel-Lucent

Beta

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

•

Enter the sub interface number in the 

Interface

 

Name

 field.

•

Enter the IP address and the Mask in the 

IP Address

 and 

Mask

 fields.

•

Enter the DLCI value in the 

DLCI

 field. 

•

Enter the bandwidth in the 

Bandwidth

 field. 

•

Enter the fragment size and maximum receive unit (MRU) in the 

Fragment 

Size

 and 

Slippage

 fields respectively.

•

Click 

OK

 to save the configuration or click 

Cancel

 to cancel the operation.

10. The sub interface thus configured is displayed under the 

Add New Sub Interface 

& DLCI Configuration

 table. Repeat this procedure to configure more sub 

interfaces.

11. After configuring the parameters, click 

Apply

 to save the Frame Relay 

configuration or click 

Cancel

 to cancel the operation.

12. The sub interfaces thus configured is displayed in the Interfaces page.

MLPPP E

NCAPSULATION

To establish communication over a PPP Multilink, an MRRU (Maximum Receive 
Reconstructed Unit) configuration option is sent to the peer during LCP 
negotiation. Optionally, an Endpoint Discriminator Option or SSHNF Option may 
also be sent out. LCP negotiation and optional link authentication take place on 
each bundle link. IPCP negotiation happens over the bundle, meaning IPCP 
packets may be sent on any one of the bundle links. Certain LCP packets like LCP 
Echo-Request and LCP Echo-Reply may be transmitted over the bundle. IP 
packets are sent over the bundle.

The MLPPP packet is encapsulated using an MLPPP header which is different 
from the standard PPP header. It contains a sequence number and additionally 
allows for fragmentation or re-assembly of the packet. MLPPP is also referred to 
as MP or MPPP.

Note:

To configure MLPPP encapsulation on an interface, first a bundle interface needs to 
be configured and then MLPPP encapsulation is set on the member interfaces, to link 
them to the bundle. 

Each MLPPP interface is identified by a bundle ID. For more details on MLPPP 
interface configuration, see 

“Add MLPPP Interface”

 under Logical Interfaces section.

1.

Set the MLPPP encapsulation on the interface by selecting 

MLPPP 

radio button 

under 

Encapsulation

. The following page displays the MLPPP parameters:

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Reviews:

No comments

Related manuals for OmniAccess 5740

Farfisa AGORA IPV11AGL Quick Starting Manual preview
AGORA IPV11AGL
Brand: Farfisa Pages: 12
ZyXEL Communications NBG-510S User Manual preview
NBG-510S
Brand: ZyXEL Communications Pages: 210
F-SECURE MESSAGING SECURITY GATEWAY - Installation Manual preview
MESSAGING SECURITY GATEWAY -
Brand: F-SECURE Pages: 19
DEUTSCHMANN AUTOMATION UNIGATE IC - Powerlink Instruction Manual preview
UNIGATE IC - Powerlink
Brand: DEUTSCHMANN AUTOMATION Pages: 50
DAUDIN iO-GridM GFGW-RM02N User Manual preview
iO-GridM GFGW-RM02N
Brand: DAUDIN Pages: 28
H3C MSR3610-I Series Installation Manual preview
MSR3610-I Series
Brand: H3C Pages: 33
Banner SureCross DX80G9M6S0P0V4V4C Manual preview
SureCross DX80G9M6S0P0V4V4C
Brand: Banner Pages: 8
Fastus IOL2-UC Instruction Manual preview
IOL2-UC
Brand: Fastus Pages: 2
D-Link DG-102SH Manual preview
DG-102SH
Brand: D-Link Pages: 83
Rose Point nemo Installation Manual preview
nemo
Brand: Rose Point Pages: 27
Asus SpaceLink WL-500 Quick Start Manual preview
SpaceLink WL-500
Brand: Asus Pages: 8
Televes 769301 Manual preview
769301
Brand: Televes Pages: 46
turck GDP-NI Series Quick Start Manual preview
GDP-NI Series
Brand: turck Pages: 6
turck BL20-2DI-24VDC-P Hardware And Engineering preview
BL20-2DI-24VDC-P
Brand: turck Pages: 450
Peavey CAB 16i User Manual preview
CAB 16i
Brand: Peavey Pages: 41
APconnections NETEQUALIZER NE 3000 User Manual preview
NETEQUALIZER NE 3000
Brand: APconnections Pages: 120
ARRIS/Motorola SURFboard SBG6400 User Manual preview
SURFboard SBG6400
Brand: ARRIS/Motorola Pages: 59
Arris Touchstone TG862 Setup & Installation preview
Touchstone TG862
Brand: Arris Pages: 2

Brands by name

Popular brands

Load more brands