Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 64 / 360

Configure

Left running head:
Chapter name (automatic)

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Alcatel-Lucent

Step 3:

Check the

IRB Enabled

check box to configure IRB. The IP Address and

Mask field appears when this check box is selected.

IRB (Integrated Routing and Bridging)

allows you to route a given protocol

between routed interfaces and bridge groups within a single switch router.

•

Enter the IP address and the Mask in the

IP Address

and

Mask

fields.

Step 4:

Enter the description for the VLAN in the

Description

field.

Step 5:

Associate a VRF to the VLAN. Select the VRF to be associated from the

VRF list. The selected VRF is displayed in the

VRF Forwarding

field.

Note:

By default, all the interfaces are associated with the Default VRF.

Step 6:

Click

Add Port

to add the Switch Port/s to the VLAN.

Add Port

pop up

window is displayed.

Figure 28: Interfaces - Configure VLAN - Add Port

•

Select the switch port from the

Switchport

drop down list.

•

Select the mode from the

Mode

drop down list:

Access/Trunk/Hybrid

. This

command is used configure the L2 interface in the access, trunk or hybrid mode.

•

Click

. The configured switch port is displayed in the Switchports table. Repeat

this procedure to add more ports.

Note:

Maximum of 8 switch ports can be added to a VLAN. Switch ports with only trunk
mode can be added to multiple VLANs.

Step 7:

Click

Apply

to configure the VLAN or click

Cancel

to cancel the

operation. VLAN is updated and a prompt to configure STP is displayed.

Step 8:

Click

to continue STP configuration.

STP Config

page is displayed

with the default values in the respective fields.

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands