Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 278 / 360

Configure

Left running head:
Chapter name (automatic)

268

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Alcatel-Lucent

•

Click

Set Default Values

to configure the congestion avoidance using default

IP DSCP values.

•

If you want to change any IP DSCP value, click

Edit

icon under the

Action

column.

Only the Minimum and Maximum Threshold values can be edited. Make
the required changes in the respective fields, and click

Apply

or click

Cancel

to cancel the operation.

Select

Weighted RED using IP Precedence

radio button to set congestion

avoidance based on IP precedence values.

The IP Precedence, Min Threshold, Max Threshold, and Drop Probability, and
Action fields are displayed in a table.

IP Precedence - Displays the IP Precedence value set earlier in the Policing
Configuration page.

Min Threshold - Minimum threshold of the queue.

Max Threshold - Maximum threshold of the queue.

Drop Probability - Displays the drop probability. By default, it is 10.

Action - Provides an option to edit the Min Threshold, Max Threshold values.

•

Click

Set Default Values

button to configure congestion avoidance using

default IP Precedence values.

•

If you want to change any IP precedence value, click

Edit

icon under the

Action

column.

Only the Minimum and Maximum Threshold values can be edited. Make
the required changes in the respective fields, and click

Apply

or click

Cancel

to cancel the operation.

Click

Apply

to create a new Traffic Class with congestion avoidance or click

Cancel

to cancel the operation.

DIT

OLICY

Follow the procedure given below to edit a policy map:

Click

Edit

icon under the

Action

column of

Policy Map

table.

Edit the description of the policy map. Policy name cannot be edited.

Click

Apply

to save changes or

Cancel

to cancel the operation.

DIT

RAFFIC

LASS

Follow the procedure given below to edit the traffic class parameters:

From the

Policy Map

table, select the policy map whose traffic class details are to

be edited. The traffic classes configured for the selected policy map is displayed
in the

Policy Map Traffic Classes

table.

Click

Edit

icon under the

Action

column.

Fields to edit the traffic class parameters page is displayed.

Edit the traffic class configuration as desired. Policy Name and Class Name
cannot be edited.

Click

Apply

to save changes or

Cancel

to cancel the operation.

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands