Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 48 / 360

Configure

Left running head:
Chapter name (automatic)

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Alcatel-Lucent

Figure 19: Interfaces - Configure PPP Encapsulation on a Channelized Serial
Interface

Enter the description for the serial interface in the

Description

field.

Enter the Maximum Transmission Unit (MTU) size in the

MTU

field. This should

be between 64 and 1500.

Select the IP address option from the

IP Address

drop down list:

Static/

Negotiate IP Address with the Peer

•

Static

option is selected, enter the IP address and the Mask in the

Address

and

Mask

fields. This IP address will be advertised during IPCP but

not allow its negotiation. Click

Remove

to delete the IP address and re-enter

the new IP address.

•

Negotiate IP Address with the Peer

is selected, a flag is set to accept the

IP address given to it by the peer during IPCP.

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands