Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 259 / 360

Configure

Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)

249

Alcatel-Lucent

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

LASS

This page allows you to add/or edit class map.

IEWING

LASS

Step 1:

Launch the Web GUI tool.

Step 2:

From the USGM menu bar, click

Configure

. All submenu/links under

Configure are displayed in the left navigation panel.

Step 3:

Click

Quality of Service

sub-menu.

Quality of Service has four tabs:

QoS Wizard

Class Map

Policy Map

, and

Interface Association

. Select

Class Map

tab. Class Map page is displayed in the

center panel.

Figure 162: Quality of Service: Class Map

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands