Alcatel-Lucent OmniAccess 5740 User Manual Download Page 339

Page: 339 / 360

Monitor

Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)

329

Alcatel-Lucent

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

IREWALL

AND

ECURITY

This page allows to view the Filters, NAT, DOS Attack, and Firewall Policy settings
configured on your system.

ILTERS

This page displays information about an IP Filter. The

Filter Params

section

displays the description of the IP Filter selected. The

Configured Actions

section

displays the actions that have been configured. The

Interface Bindings

section

displays information about the interfaces to which the filter policies have been
applied. On clicking the

Show Policy Statistics

, global statistics for that Filter

policy is displayed.

IEWING

ILTER

TATISTICS

Follow the procedure below to view the Filter statistics.

Step 1:

Launch the Web GUI tool.

Step 2:

From the USGM menu bar, click

Monitor

. All submenu/links under

Monitor are displayed in the left navigation panel.

Step 3:

Click

Firewall and Security

sub-menu.

The Firewall and Security has four tabs:

Filters

NAT

DOS Attack

and

Firewall

Policy

. By default,

Filters

tab is selected and Filter page is displayed in the center

panel.

Step 4:

Select the filter whose statistical information is to be viewed from the

Filter List

drop down list. The filter page displays the parameters, actions and the

interface information for the selected filter.

Figure 216: Monitor: Firewall and Security - Filters

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands