Alcatel-Lucent OmniAccess 5740 User Manual Download Page 330

Page: 330 / 360

Monitor

Left running head:
Chapter name (automatic)

320

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Alcatel-Lucent

RAFFIC

TATISTICS

This page displays the IP and ICMP statistics.

IP S

TATISTICS

This page displays the IP Statistics.

IEWING

IP S

TATISTICS

Follow the procedure below to view the IP statistics.

Step 1:

Launch the Web GUI tool.

Step 2:

From the USGM menu bar, click

Monitor

. All submenu/links under

Monitor are displayed in the left navigation panel.

Step 3:

Click

Traffic Statistics

sub-menu.

The Traffic Statistics has two tabs:

IP Statistics

and

ICMP Statistics

. By default,

IP Statistics

tab is selected and IP Statistics page is displayed in the center

panel.

The IP Statistics page allows to view the IP statistical details. It displays received,
sent, fragment and other parameter counter values.

Step 4:

Select

Default VRF

radio button to view the IP statistics attached to

default VRF.

Step 5:

Select

Select VRF

radio button. Choose the required VRF from the list.

This displays the static routes attached to the VRF selected from the list.

Figure 212: Monitor: Traffic Statistics - IP Statistics

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands