agrifac Condor C03 User Manual Download Page 25

Page: 25 / 250

SAFETY

Condor-UM-2011-21-R0-en-us-20210108

Label

Instruction

Order number

RUNOVER HAZARD

Prevent death or serious injury.

Use wheel chocks:

•

After parking on a slope.

•

Before maintenance.

8461224

ALARM MUST SOUND

When operating this vehicle in reverse.

8461263

Replaces the label

below since 2019.

Label

Instruction

Order number

ROTATING FAN

Prevent death or serious injury.

Keep your hands away.

8461220

FALL HAZARD

Prevent death or serious injury.

Do not ride on machine.

8461242

Label on the AirFlowPlus-boom (option).
Label near the HTA unit (option).

LOUD NOISE

Prevent hearing loss.

Use ear protection.

8461219.1

Use Personal Protective Equipment:

•

Chemical resistant gloves.

•

Chemical resistant overall.

•

Respiratory protection.

8461257

The label is supplied

since Condor 5.

WARNING

Summary of Contents for Condor C03



























































































































































































































































Search results

Summary of Contents for Condor C03

Reviews:

Related manuals for Condor C03

Brands by name

Popular brands

agrifac Condor C03, User Manual

Search results

Summary of Contents for Condor C03

Reviews:

Related manuals for Condor C03

Brands by name

Popular brands