agrifac Condor C03 User Manual Download Page 143

Page: 143 / 250

OPERATION

Condor-UM-2011-21-R0-en-us-20210108

143

5.32 -

5.33 BoomSupportPlus system (option)

Refer to the manual of the BoomSupportPlus system.

5.34 AddFlow system (option)

Refer to the manual of the AddFlow system.

5.35 Spray boom folding

NOTICE

Prevent damage to the spray boom: stop driving before you fold the spray
boom.

ELECTROCUTION HAZARD

Prevent death or serious injury:

Do not unfold or fold the spray boom near power lines.

5.36 After spraying

Procedure:

Clean the inside of the spray tank with the
tank cleaning nozzles.

Rinse the sprayer with clean water.

Clean the suction basket, basket filter, suc-
tion filter element and the pressure filter el-
ements.

Rinse your gloves before you take them off.

Wash your hands and lower arms with soap
and water.

Wash your body and put on clean clothes.

DANGER

Summary of Contents for Condor C03



























































































































































































































































Search results

Summary of Contents for Condor C03

Reviews:

Related manuals for Condor C03

Brands by name

Popular brands

agrifac Condor C03, User Manual

Search results

Summary of Contents for Condor C03

Reviews:

Related manuals for Condor C03

Brands by name

Popular brands