agrifac Condor C03 User Manual Download Page 68

Page: 68 / 250

OPERATION

Condor-UM-2011-21-R0-en-us-20210108

In practice

(refer to the safety label below the switches)

Replace the cab filter elements:

•

If the warning light “cab pressure” stays on after the left door has been closed 30 seconds
and the fan is running at maximum speed.

•

According to the interval in this manual (whichever comes first). Refer to



151

Before spraying:

Turn the ignition on.

The warning light “cab pressure” must come on.

Close the doors.

The warning light “cab pressure” must go off after maximum 30 seconds.

While spraying:

Keep the doors closed.

Increase the fan speed when the warning light “cab pressure” comes on. Replace the filter
elements if the warning light stays on (fan at maximum speed).

Stop spraying at the first indication of chemical odor, taste or irritation.

Summary of Contents for Condor C03



























































































































































































































































Search results

Summary of Contents for Condor C03

Reviews:

Related manuals for Condor C03

Brands by name

Popular brands

agrifac Condor C03, User Manual

Search results

Summary of Contents for Condor C03

Reviews:

Related manuals for Condor C03

Brands by name

Popular brands