agrifac Condor C03, User Manual

Page: 196 / 250

MAINTENANCE
196
Condor-UM-2011-21-R0-en-us-20210108
6.36 Pressure filter
Condor 5: in preparation
Condor 2, 3 and 4.
Cleaning / replacing the filter elements:
1. Turn the engine off.
2. Turn the ignition on.
3. Make sure that you do
not get spray liquid on your body. Close the
electric valves before you remove the filter
cap:
1. Press the button below the symbol .
2. Press the button below the symbol .
3. Wait until the symbol becomes green :
the electric valves are closed.
4. Use Personal Protective
Equipment specified by the chemical manu-
facturer (refer to the label and the Safety Da-
ta Sheet).
5.
Loosen the filter cap [2] with the hook
wrench [1].
6. Remove the filter cap [2].
7. Remove and clean the filter elements [3].
Replace the filter elements [4] if necessary.
8. Place the parts back into the filter housing.
9. Tighten the filter cap with the hook wrench.
10. Press the button below the symbol .
Wait until the symbol becomes gray: .
The electric valves are back in their initial
position.
11. If you forget the previous step:
Symbol appears on the main screen in
the cab.
Press on the main screen: the electric
valves go back to their initial position.
WARNING
WARNING