agrifac Condor C03 User Manual Download Page 65

Page: 65 / 250

OPERATION

Condor-UM-2011-21-R0-en-us-20210108

Adjusting the right armrest:

Sit down on the driver’s seat.

Pull the lever [1] up and move the armrest up
or down.

Pull the lever [2] up and move the armrest
forward or rearward.

Adjusting the handrest:

Sit down on the driver’s seat.

Push or pull the handrest [1] to the position
[A], [B] or [C].

Adjusting the steering column:

Sit down on the driver’s seat.

Push the pedal [1] down and adjust the an-
gle.

Pull the lever [2] up and adjust the angle.

Loosen the knob [3] and adjust the height.
Tighten the knob.

Summary of Contents for Condor C03



























































































































































































































































Search results

Summary of Contents for Condor C03

Reviews:

Related manuals for Condor C03

Brands by name

Popular brands

agrifac Condor C03, User Manual

Search results

Summary of Contents for Condor C03

Reviews:

Related manuals for Condor C03

Brands by name

Popular brands