agrifac Condor C03 User Manual Download Page 136

Page: 136 / 250

OPERATION

136

Condor-UM-2011-21-R0-en-us-20210108

Fully submerge the suction basket.

Open the tank lid.

10.

Press the button [10] for only filling the
spray tank with clean water (or with spray
liquid prepared in advance).

This screen page appears:

------

= Desired contents.

11.

To start or restart filling:

Press

. The button becomes green:

The main page appears when the tank is full.

To interrupt filling:

Press

. The button becomes gray:

To stop filling:

Press

. The filling stops and the previous

screen page appears.

The same buttons are present on the tank
screen. These buttons have the same func-
tions.

Summary of Contents for Condor C03



























































































































































































































































Search results

Summary of Contents for Condor C03

Reviews:

Related manuals for Condor C03

Brands by name

Popular brands

agrifac Condor C03, User Manual

Search results

Summary of Contents for Condor C03

Reviews:

Related manuals for Condor C03

Brands by name

Popular brands