agrifac Condor C03, User Manual

Page: 134 / 250

OPERATION
134
Condor-UM-2011-21-R0-en-us-20210108
Adding spray product via the induction hopper (option)
WARNING
Read and obey the instructions on the label and in the documentation of the
spray product.
While filling the spray tank with water, the spray product can be added via the
induction hopper.
Procedure:
1. Use Personal Protective
Equipment specified by the chemical manu-
facturer (refer to the label and the Safety Da-
ta Sheet).
2. Open the hood between the left wheels.
3. Unlock [1] the induction hopper and pull the
hopper out.
4. Unlock [3] the lid [4].
5. Open the lid [4].
6. Press the button below the symbol .
Wait until the symbol becomes green: .
The induction hopper valve is OPEN.
7. Open the valve [5] to supply water through
the rinsing ring.
8. Pour the spray product into the induction
hopper.
9. Open the suction valve [2].
10. Place the empty container over the rinsing
nozzle [6]. Open the valve [7] and rinse out
the container. Place the bag support [8] over
the rinsing nozzle to rinse out empty bags.
11. Clean the induction hopper with the spray
gun [9].
12. Press the button below the symbol .
Wait until the symbol becomes gray: .
The induction hopper valve is CLOSED.
13. Wait until the induction hopper is empty and
close the valve [2].
14. Close and lock the lid.
15. Push the induction hopper back in until it
locks.
16. Close the hood between the left wheels.
WARNING