Quick Start Guide 2
Agilent Nano Indenter G200 User’s Guide
2-40
Figure 2-53
Click Run Batch to begin testing
32
In the resulting Review Sample Names dialog box, you can modify
the
Sample Name
or leave the name as is. In either case, click
OK
to
continue.
33
In the Review the first test location of Sample dialog box, as shown
in
on page 2-41, verify that the microscope is in the
correct location and then click
OK
to continue.
N O T E
You can abort a test at any time by clicking the red stop button directly
below the green arrow. You have the option of aborting a single test or
aborting an entire batch. Make your selection and then click the
OK
button.
