Agilent Technologies Nano Indenter G200, User Manual

Page: 422 / 478

NanoSuite Explorer D
Agilent Nano Indenter G200 User’s Guide D-57
31
In the Insert New Variable dialog box, enter the Internal Name as
RampLoadingRate (no spaces).
32
Under the label Add To, select the Sample radio button.
33
Click OK .
34
In the General tab, set the following values:
a
Display name = RampLoading Rate
b
Unit class = Force Rate
c
Unit Type = mN/s
35
In the Description tab, enter Loading rate during the initial ramp .
36
In the Formula tab, click the Edit… button.
37
In the Formula Editor dialog box, type
RampForceLimit/RampTime (no spaces) into the text box.
38
Click the Check button.
39
Verify that the response is Formula is okay .
40
Click OK .
41
In the Advanced tab, set the following values:
a
Category = Load Segment Formulas
b
When = Pre Sample
c
Deselect all options .
42
Select Validate Method from the Tools menu.
43
Verify that you receive a message box that the method is valid.
44
On the left-hand side of the screen, click on the Test Flow tab.
45
Scroll down and select the GoTo – Raw Load, Loading,
LoadingRateForStrain test segment, as shown in Figure D-67 on
page D-58.