NanoSuite 4
Agilent Nano Indenter G200 User’s Guide
4-105
Simulation Mode
When NanoSuite controls hardware, you can have only one instance of
the software running. However, when you operate NanoSuite in
simulation mode, you can have multiple instances. This enables you to
compare multiple test methods or samples.
To operate NanoSuite in simulation mode:
1
Exit NanoSuite if it is open.
2
Choose
Start
from Windows.
3
Go to
All Programs
.
4
Choose
Agilent NanoSuite > NanoConfig
as shown in
.
Figure 4-118
NanoConfig command via Windows Start menu
5
At the User Login prompt, select
Agilent
from the Name drop-down
menu.
6
Click
OK
.
7
In the NanoSuite Configuration dialog box, select the
Use
Simulation
checkbox as shown in
