Commonly Used Procedures 6
Agilent Nano Indenter G200 User’s Guide
6-57
Periodically, NanoSuite will display the message shown in
This is normal because the indenter has not yet touched the surface of
the sample.
Figure 6-80
NanoSuite message
Allow testing to complete (approximately 1 hour).
21
When testing is complete, go to the
Review
page.
22
Right-click anywhere in the Legend pane and select
Select All Tests
from the resulting pop-up menu.
23
Delete any obviously aberrant tests, such as the aberrant test shown
in
a
Identify the test number by referring to the legend next to the
graph of results.
b
Right-click on the number of the aberrant test in the Legend pane.
c
Select
Delete Test
from the resulting pop-up menu.
d
Click
Yes
in the Test Deletion confirmation box
e
Right-click anywhere in the Legend pane and select
Select All
Tests
from the resulting pop-up menu to populate the graph.
Figure 6-81
Example of an aberrant test
