Agilent Technologies Nano Indenter G200, User Manual

Page: 294 / 478

Commonly Used Procedures 6
Agilent Nano Indenter G200 User’s Guide 6-75
11
In the Sample View Pane , right-click on the project level and select
Add X-Y Graph from the resulting pop-up menu, as shown in
Figure 6-101 .
Figure 6-101 Select Add X-Y Graph from right-click menu
12
In the Add Graph dialog box ( Figure 6-102 on page 6-76):
a
Select the desired X axis (such as Displacement Into Surface)
from the X Axis drop-down menu.
b
Select the desired Y axis (such as E IT Channel) from the YI
Axis drop-down menu.
c
Select the samples to be used in the comparison in the Samples
list, or
d
If no samples are selected, then all samples will be included.
13
Click OK .