manualshive.com logo in svg

Agilent Technologies GS8210, Programming Manual, Page: 91 / 352

Share
Download
Agilent Technologies GS8210 Programming Manual Download Page 91

Programming Command Reference

5

N9360A Multi UE Tester GSM Programming Manual

5-33

 

Time

CONFigure:TIME <int HH>,<int MM>

CONFigure:TIME?

This command sets the time of the clock in the Tester. 

<int 

HH>

 is hour within the range from 

0

 to 

23

 and 

<int MM>

 is 

minutes within the range from 

0

 to 

59

.

This query command returns the time of the clock in the Tester 
by 

<int HH>

 and 

<int MM>

. The range of these values is same 

as that of the command parameter.

Panel Key Control

CONFigure:PKEY UNLOCK|LOCK

CONFigure:PKEY?

This command sets the panel key control to 

UNLOCK

 or 

LOCK

. At 

preset, this is set to 

UNLOCK

. If this is set to 

LOCK

, only 

Automatic Test and Configuration are available. In Automatic 
Test, Radio System, BCCH and TCH (Talk) are locked and 
cannot be changed.

This command is not identical to 

Lock System Panel

 of the System 

commands. See 

Lock System Panel

 on 

page 5-5

.

This query command returns the panel key control setting by 
string of 

UNLOCK

 or 

LOCK

.

Printer Control

CONFigure:PRINter PMG800|USBMemory

CONFigure:PRINter?

This command sets the output device of the Print Screen. The 
choices are PMG800 and USB Memory. At preset, this is set to 
USBMemory.PMG800. This query command returns the output 
device of the Print Screen with strings.

Log Output

CONFigure:LOG:DEBUG:SAVE

This command saves the debugging log.

Summary of Contents for GS8210

































































































































































































































































































































































Reviews:

No comments