Programming Command Reference
5
N9360A Multi UE Tester GSM Programming Manual
5-43
Burst Timing Test
CONFigure:SEQuence:BTIMing <int>
CONFigure:SEQuence:BTIMing?
This command sets whether to execute the Burst Timing test in
the test sequence on the six measurement channels.
<int>
sets
whether to execute this test on each Traffic Channel by the total
sum of the 6 bits as follows.
bit 0 (1): Testing on the TCH1
bit 1 (2): Testing on the TCH2
bit 2 (4): Testing on the TCH3
bit 3 (8): Testing on the TCH4
bit 4 (16): Testing on the TCH5
bit 5 (32): Testing on the TCH6
The value in the parentheses is decimal value for each bit. Refer
to
Setting and Querying the Registers
The set of each bit is
1
for Run and
0
for — (skip). At preset, this
is set to
63
.
This query command returns the set of the Burst Timing test
with integer. The meaning of the return value is same as that of
the command parameter.