5-138
N9360A Multi UE Tester GSM Programming Manual
5
Programming Command Reference
Signaling Result (GPRS/EGPRS mode)
TESTs:MANual:RESults:SIGNaling?
This query command returns the test results value
<int>
.
<int>
is sum of the value of 3 bits as follows.
bit 0 (1): Attach
bit 1 (2): Attached
bit 2 (4): Connect
Each bit is set to
0
if the test is pass, or each bit is set to
1
if the
test is fail. The value in the parentheses is decimal value for
each bit. Refer to
Setting and Querying the Registers
on
.
If there are no test results, all bits are set to
1
and the value
511
is returned.
TESTs:MANual:RESults:SIGNaling:EXPand?
This query command returns the test contents currently being
executed and system type with integer value of
<int 1>
and
<
int 2>
. Each value is separated by a comma
•
<int 1>
contains signaling result of manual test by sum of
the value of 3 bits ranging from
0
to
7
as follows
This query command returns test result with
<int>
, by sum of
the value of 3 bits as follow.
bit 0 (1): Attach
bit 1 (2): Attached
bit 2 (4): Connect
Each bit is set to
0
if the test passed, or each bit is set to
1
if the
test failed. The value in the parentheses is decimal value for
each bit. Refer to
Setting and Querying the Registers
on
.
If there are no test results, all bits are set to
1
and the value
511
is returned.
• <int 2> contains the system currently being executed. The
return value is
1
(W-CDMA),
0
(GSM) or
2
(CDMA2000).
N O T E
If the mode is set to GSM, this command is invalid.