manualshive.com logo in svg

Agilent Technologies GS8210, Programming Manual, Page: 3 / 352

Share
Download
Agilent Technologies GS8210 Programming Manual Download Page 3

I

N9360A Multi UE Tester GSM Programming Manual

iii

 

Preface

Thank-you for purchasing the Agilent N9360A Global System for Mobile 

Communication (GSM) option. This is the GSM software for the N9360A 

Multi UE Tester.
• Before using the tester, the user is advised to read this manual 

carefully to ensure correct usage and also to fully utilize the tester 

capability.

• This manual is a reference document and the user is advised to keep it 

carefully for future reference.

• The manual includes the characteristics of GSM, the tester operation, 

test procedures and screen references.

• Refer to the 

N9360A Multi UE Tester Installation Guide

 for information 

regarding installation and details of the tester. Refer also to the 

N9360A W-CDMA Programming Manual

 for information about the test 

functions of Wideband Code Division Multiple Access (W-CDMA).

• This manual applies directly to the Tester with firmware revision 

F.02.14 and above.

Notation

The following notations are used in this manual:
• Softkey: indicates a softkey;
• [Screen Name]

: indicates a screen name;

• Tester/tester 

: indicates the N9360A Multi UE Tester.

Notices

• The information contained in this manual is subjected to change with 

notice.

• No part of this manual may be reproduced either mechanically, 

electronically or otherwise, without permission from Agilent 

Technologies, Inc.

Summary of Contents for GS8210

































































































































































































































































































































































Reviews:

No comments