![Agilent Technologies 8702D Installation Manual Download Page 153](http://html.mh-extra.com/html/agilent-technologies/8702d/8702d_installation-manual_2867953153.webp)
5-9
Automated Verification – Option 011
Step 3. Device Verification
3
Press
CONTINUE
to run the test:
• If you switched the record function
off
, you have to press
CONTINUE
after
each S-parameter measurement.
• If you switched the record function
on
, the test displays and prints the pass/
fail information for the S-parameter measurements that are valid for system
verification.
4
When the analyzer finishes all the measurements, connect the 50 dB attenuator
(supplied in the verification kit), as shown in
.
Figure 5-5. Connections for the 50 dB Verification Device
5
Press
RETURN
,
TESTS
,
29
,
x1
,
EXECUTE TEST
,
CONTINUE
.
Summary of Contents for 8702D
