Advantech EDG-4508, User Manual

Page: 93 / 140

Chapter 6 Setting Up Custom 85
Note: When adding access permission, you may either view the
access control list by Port, or by IP address. These two
approaches also apply to the procedure for adding new
hosts. The next two sections describe how to add hosts
using both approaches.
Configuring Through View by IP
Using the view access control list by IP address option displays the
access control list by giving the server IP addresses. It is clear to see
which IP addresses have been granted access to which ports, and which
IP addresses are allowed onto the server.
Adding Access Permission of One Host
If a particular host is permitted access to all ports on a specific server, we
recommend that you configure using the view access control list by IP
address option.
1. Click on the Access Control tab, and then select the IP address option
next to View access control list by:
2. Click on the Server you would like to modify.
3. Click on Add IP to open the Grant Access IP window.