Advantech EDG-4508, User Manual

Page: 71 / 140

Chapter 5 Setting Up Multi-Host 63
Removing a Granted Host
If you do not allow a particular host to use any of the ports, simply
remove the host from the list.
Note: If you empty the access control list, then by default, only
the connecting host’s IP address is granted.
1. Click on the host’s IP address to highlight it.
2. Click on the Remove button, and then click OK to exit.
Configuring Through View by Port
By choosing the option View access control list by Port, it is easy to see
the access permission granted for each port. This viewing option is par-
ticularly useful for adding hosts to specific ports.
Adding a Host IP Address to a Specific Port
1. Click on the Port you would like to add a host to.