manualshive.com logo in svg

Advantech EDG-4508, User Manual

Share
Download
Advantech EDG-4508 User Manual Download Page 128

120

EDG-4508/4516  User's Manual

This chapter describes how to change between the three application
modes-Single-Host, Multi-Host, and Custom-after installation. The only
way to change from one application mode to another is to rerun the
driver/software Setup program

If you started off by installing your server as Single-Host, you will have
noticed, for one thing, that it is not possible to change the server’s IP
address from this application type. If at some point during the server’s
operation you find it necessary to change the IP address, share the ports
with another NT server, or initiate some type of remote control function,
you will need to change to a different application mode.

Note that changing between application types will not automatically
wipe out previously set configurations. Be sure to select the correct
mode for your application. See chapter 2 of this manual for details.

Note:

To change to a different application mode, you will need to
rerun the Setup program. See chapter 4 to install Single-
Host, chapter 5 to install Multi-Host, and chapter 6 to in-
stall Custom.

Summary of Contents for EDG-4508













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands