manualshive.com logo in svg

Advantech EDG-4508, User Manual

Share
Download
Advantech EDG-4508 User Manual Download Page 113

Chapter 7  Utility Programs

105

5. Click on the Select Item tab to open the list of options shown below.

This function is provided so that you can select monitoring items
according to your needs. Items selected will be displayed in the EDG-
4508/4516 Monitor window. Some operations can be activated simul-
taneously. Check or uncheck the boxes as needed.

6. Click on the General tab to set up the Sampling interval. This is the

time interval the program waits before updating EDG-4508/4516 ’s cur-
rent data. Select a number from the pull-down list, and then click OK.

7. The servers and ports that were selected will be listed in the info box

upon returning to the EDG-4508/4516 Monitor window. General infor-
mation such as Model No., EDG-4508/4516  Name, OP_mode, EDG-
4508/4516  IP Address, and Port No. will also be displayed.

Summary of Contents for EDG-4508













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands