manualshive.com logo in svg

Advantech EDG-4508, User Manual

Share
Download
Advantech EDG-4508 User Manual Download Page 111

Chapter 7  Utility Programs

103

EDG-4508/4516 Monitor

The first time you run EDG-4508/4516 Monitor you will need to set up the
configuration by selecting target servers, target ports, and monitoring
items. You will be able to save the configuration for the next time you use
it, or go back to EDG-4508/4516 Monitor to check the monitoring infor-
mation. Check the Help menu if you have trouble using this program.

1. To start EDG-4508/4516 Monitor, click on

Start —> Programs —> EDG-4508/4516  —> EDG-4508/4516 Monitor.

2. The EDG-4508/4516 Monitor window opens.

Note:

You will need to configure your server before using any of
the EDG-4508/4516 Monitor toolbar functions. Refer to the
next section for instructions on how to configure.

Toolbar Functions

In this section we describe how to use the EDG-4508/4516 Monitor tool-
bar functions.

Configuring EDG-4508/4516 Monitor

You will need to run the Configure function before using any of the
other functions provided by EDG-4508/4516 Monitor.

 

Summary of Contents for EDG-4508













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands