Advantech EDG-4508, User Manual

Page: 61 / 140

Chapter 5 Setting Up Multi-Host 53
10.Before exiting EDG-4508/4516 Manger you should save the new con-
figuration. Choose Save Configuration from the Server menu, or click
on the toolbar Save all Servers icon to carry this out.
11.Exit EDG-4508/4516 Manager when you finish.
Deleting a Server
If for some reason you need to delete a server from your system,
click on the server name to highlight it, and then choose Delete
Server from the Server menu, or click on the toolbar Delete Server icon. A
warning window will pop up asking if you really want to delete the server.
Click OK to delete.
Modifying COM Name Mappings
You may use EDG-4508/4516 Manager to change previously as-
signed COM names. Choose Map Port from the Port menu, or
click on the toolbar Map Port icon. You will be asked to choose from two
options. You may change the name of all servers simultaneously, provid-
ed you want the COM port numbers to be consecutive, or, you may
change the names one port at a time. The procedure is as follows:
Change All COM Names Consecutively:
1. Click on the server name whose port names you would like to modify.
2. Click on port 1 in the right info box.
3. Choose Map Port from the Port menu, or click on the toolbar Map Port
icon to activate the function.
4. Select the COM name that the first port will be mapped to.
5. Check the Mapping COM number consecutively box.
6. Click OK to activate the change.