manualshive.com logo in svg

Advantech EDG-4508, User Manual

Share
Download
Advantech EDG-4508 User Manual Download Page 107

Chapter 7  Utility Programs

99

Firmware Utility

Advantech continually upgrades its driver software and server firmware
to keep pace with the ever-expanding world of computing. You can use
the Firmware Utility to carry out the upgrade procedure. Access Advan-
tech’s Web site at www.Advantech.  com to download the required com-
puter file (contact our sales department if you need assistance with this),
and then follow these instructions.

1. To start Firmware Utility, click on

Start —> Programs —> EDG-4508/4516  —> Firmware Utility.

2. The Search all EDG-4508/4516 Servers window opens, indicating that

the program is searching the network for all active EDG-4508/4516 s.

3. After completing the search, the EDG-4508/4516 Server firmware up-

grade utility window opens, listing all EDG-4508/4516 s that were found.

Summary of Contents for EDG-4508













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands