Advantech EDG-4508, User Manual

Page: 59 / 140

Chapter 5 Setting Up Multi-Host 51
3. If you are the system administrator and know the current password,
or if you are setting up a new password, select Yes, I am the adminis-
trator and then enter the password in the text input box.
If you select No, I am a general user, you will be allowed to install your
EDG-4508/4516 , but you will not be able to change any of the param-
eter settings. Click on Next to continue.
4. The next window lists EDG-4508/4516 ’s current IP address. Change
the number if needed, and then click on Next to continue.
5. Select the COM port name that you would like the first port on the
server to map to. This will add all of EDG-4508/4516 ’s ports (8 or 16,
depending on the server model number) to your NT/95/98 system,
using consecutively numbered COM names. Click on Next to contin-
ue.
6. When the Complete! window opens, check the information to make
sure that everything is correct, and then click on Finish to continue.