manualshive.com logo in svg

Advantech EDG-4508, User Manual

Share
Download
Advantech EDG-4508 User Manual Download Page 63

Chapter 5  Setting Up Multi-Host

55

Note:

The screen at the right shows the display after un-map-
ping ports 3 and 5.

Upgrading NPort Server Pro Firmware

Advantech continually upgrades its driver software and server
firmware to keep pace with the ever-expanding world of comput-

ing. You can use the Upgrade function located on EDG-4508/4516 Man-
ager’s toolbar to carry out the upgrade procedure. Access Advantech’s
Web site at www.Advantech.com to download the required computer file
(contact our sales department if you need assistance with this), and then
follow these instructions.

1. Stop all port action related to the server you are upgrading.

2. Choose Upgrade Server from the Server menu, or click on the toolbar

Upgrade icon.

3. Locate and then select the filename of the firmware that you down-

loaded.

 

Summary of Contents for EDG-4508













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands