manualshive.com logo in svg

Advantech EDG-4508, User Manual

Share
Download
Advantech EDG-4508 User Manual Download Page 49

Chapter 4  Setting Up Single-Host

41

2. Choose Upgrade Server from the Server menu, or click on the toolbar

Upgrade icon.

3. Locate and then select the filename of the firmware that you down-

loaded.

4. Click on Open and then wait until you see an “upgrade completed”

message. The server will restart automatically.

Note:

When using this procedure, only the selected server’s firm-
ware is upgraded. If you know that new EDG-4508/4516
Manager software has been released, it is recommended
that you uninstall the old EDG-4508/4516 Manager pro-
gram from your NT/95/98 host’s hard drive, and then in-
stall the new one.

Replacing a Server

In the unlikely event that your EDG-4508/4516  needs to be replaced, you
can use EDG-4508/4516 Manager’s Replace Server... function. This pro-
cedure uses EDG-4508/4516 ’s “hot-swap” feature, and gives you an
easy way to locate the replacement server. The configurations that were
set while installing the now defective server will also be saved. Other-
wise, you would need to use EDG-4508/4516 Manager to delete the old
server, and then configure the new server and all of its ports.

Follow the steps below to perform hot-swap:

1. Click on the server that has a question mark (?) on top of it to highlight

it.

Summary of Contents for EDG-4508













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands