Advantech EDG-4508 User Manual Download Page 134

Page: 134 / 140

126

EDG-4508/4516 User's Manual

LED Description

LED

COLOR

Description

Power

Red

Indicates that EDG-4508/4516 is turned on and power is being

supplied to the server

Ready

Green

Steady on indicates that EDG-4508/4516 is running without problem.
Flashing indicates the server is being located by the EDG-4508/4516
Manager Locate Server function.

100M

Green

Steady on indicates that EDG-4508/4516 Ethernet connection is
running at 100 Mbps.

10M

Green

Steady on indicates that EDG-4508/4516 Ethernet connection is
running at 10 Mbps.

Traffic

Green

Blinking indicates data is being received from the Ethernet lnterface.

Green

Blinking indicates that there's outgoing data through the serial port.

Green

Blinking indicates that there's incoming data through the serial port.

Power

Ready 100 M

10 M

Traffic

Note:

The number of Tx/Rx LDEs depends on the model you
use. For EDG-4516, there are 16 Tx and Rx LEDs. For
EDG-4508, there are 8.

Summary of Contents for EDG-4508













































































































































Search results

Summary of Contents for EDG-4508

Reviews:

Brands by name

Popular brands

Advantech EDG-4508, User Manual

Search results

Summary of Contents for EDG-4508

Reviews:

Brands by name

Popular brands