manualshive.com logo in svg

Advantech EDG-4508, User Manual

Share
Download
Advantech EDG-4508 User Manual Download Page 112

104

EDG-4508/4516  User's Manual

1. Choose Configure from the Monitor menu, or click on the toolbar

Configure icon to open the Monitor configuration window.

Note:

There are three tabs, Select Port, Select Item, and Gener-

al, located at the top of the window. The Select Port page
will be opened by default, and the program will  find all
EDG-4508/4516 s currently connected to the network.

2. Select the server that you want to monitor from the Server IP Address

pull down menu. The server information will appear in the Monitoring
EDG-4508/4516 Server info box.

3. The Port No. check box, for ports needing to be monitored, should be

checked as shown above. For those ports that no longer need moni-
toring, click inside of the checked box to remove the check mark.

4. If you need to delete some servers from the list, highlight the servers

to be deleted, and then click on the Delete Server button in the lower
left hand corner of the Monitor configuration window.

Summary of Contents for EDG-4508













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands